As manufacturers of antennas and SAR equipment, the company has always believed it of great importance to provide supporting equipment to these products. Over the years, this has resulted in a range of Test Sets being manufactured by Techtest.
Our range of VSWR Test Sets is known throughout the aviation community as the industry standard products for testing aircraft antennas. They are all available with ruggedized cases and models are available to cover all the frequencies commonly found in avionic equipment. These VSWR Test Sets allow antennas to be checked for correct operation and can be used whilst the antenna is still on the airframe thus saving costly removal of the antenna when it is not necessary.
It is vital that an Emergency Locator Transmitter works correctly, if it is used, so Techtest supply a range of test equipment to check correct operation of this type of equipment. These Test Sets can be used with all types and makes of ELTs and EPIRBs.
|12-602-8 Antenna and Cable Analyzer (PDF)|
|12-406 Homing Test Set (PDF, 436Kb)|
|12-500-5 PLB / ELT Test Set (PDF, 60Kb)|
|12-503-1 PLB / ELT Test Set (PDF, 60Kb)|
|12-503-5 Programming Test Set (PDF, 84Kb)|
|12-612 Electrostatic Discharger Test Set (PDF, 840Kb)|
The 500 series of Personal Locator Beacons or Survival Emergency Locator Transmitters offers a wide range of options to suit any requirement. The 500 series of Personal Locator Beacons has been chosen by a wide customer base, including armed forces, commercial airlines, off-shore helicopter operators, life raft manufacturers and ejection seat manufacturers.
For all the 500 series Personal Locator Beacons, Techtest has obtained full certification to aircraft standards so these products should not be confused with inferior quality beacons intended for hobby use.
The 500-1 Personal Locator Beacon is a compact light-weight unit operating on 121.5 MHz and 243 MHz and has been favoured by customers requiring a small beacon for many years.
The 500-12 Personal Locator Beacon is designed to work with the COSPAS-SARSAT search and rescue satellite system and features 406 MHz as well as 121.5 MHz and 243 MHz distress signals. It also incorporates a speech function which allows survivors to have two way voice communication with a rescue craft. In addition to the normal aircraft approvals the 500-12 also has full Boeing and Airbus approvals making it the natural choice for commercial airline operators due to its compact size and low weight. The 500-27 shares all the functionality of the 500-12 but also incorporates embedded GPS to minimize location time in the event of an emergency.
The latest 500-27-07 PLB (above right) utilizes all the proven electronics of its predecessors but updates the casing design to give a modern stylish appearance without losing the rugged and durable qualities associated with Techtest SAR products.
The new 500-32 PLB (above left) offers similar features to the 500-27-07 but in a significantly smaller package (35% reduction in volume). This has been achieved by using state-of-the-art battery technology and optimised electronics.
After rigorous testing the 500-32 series of ELT(s) or PLB has recently been awarded a COSPAS SARSAT type approval (Certificate No. 223).
500-30, 406 MHz Ejection Seat Compatible PLB
The 500-30 is the latest member of the highly successful Techtest PLB range offering 406MHZ transmission and Guard frequency transmission combined with embedded GPS to provide positional accuracy of 100m.
With both manual and automatic activation capability the beacon offers maximum flexibility across a fleet of aircraft. Providing interface solutions for inclusion in PSPs within ejection seats such as ACES II/III and in combination with parachute activation mechanisms such as the BA22. Once activated upon ejection the PLB will transmit SAR frequency signals via remote antennas allowing rapid recovery.
Once on the ground aircrew can continue to transit using remote or integrated dual frequency antennas including GPS providing portable functionality and the ability to control beacon transmission according to circumstance. With 5 year battery life, 48 hours transmission on 121.5MHz and 24hours on 406MHz at -20 Â°C the 500-30 meets COSPAS SARSAT, ED-62A, STANAG 7007 and MIL-STD 810F specifications.
500-12 Multi Function Personal Locator Beacon
500-27 Multi Function Personal Locator Beacon + Embedded GPS
500-27-07 Multi Function Personal Locator Beacon + Embedded GPS
500-30 Multi Function Personal Locator Beacon
500-32 406MHz Multi Function Personal Locator Beacon
12-503-5 Programming Test Set
HR Smith Group of Companies
Since its formation in 1966, the HR Smith Group of Companies has opened up a whole new horizon of advanced technology through its expertise in radio frequency technology, specialist materials and electronic engineering. The Group comprises the following individual companies.
HR Smith (Technical Developments) Limited
HR Smith (Technical Developments) designs and manufactures a complete range of airborne antennas for fixed and rotary wing platforms, suitable for both civil and military applications.
The company manufactures all the necessary antenna accessories to complete the antenna installation including its range of patented conductive sealing gaskets. HR Smith also manufactures electrostatic dischargers for complete noise quietening on all types of aircraft platforms.
Techest manufacture a full range of internationally certified Emergency Locator Transmitters (ELTs), Personal Locator Beacons (PLB) and Automatically Deployable Emergency Locator Transmitters (ADELT). Used extensively with the world wide COSPAS-SARSAT rescue system. Latest versions have in built Global Positioning System (GPS) for enhanced rescue.
The company also offers a full range of Search and Rescue Homing and Decoding systems to locate personnel in distress for both civil and military SAR applications. In addition Techtest manufactures a range of test equipment specifically for testing aircraft antennas and Search and Rescue products.
Specmat's unique combination of advanced design and manufacturing processes plus R.F. design capabilities places it at the forefront of advanced thermoplastic composite technology.
The new generation of advanced engineering thermoplastic has enabled Specmat to create advanced reinforced structures which have unique rain erosion and impact resistance combined with high temperature operational capability.
Specmat Technologies Inc.
To compliment the UK-based Group of Companies, Specmat Technologies Inc. was formed in the US, with its headquarters in Rockford, Tennessee.
The company coordinates all business of the HR Smith Group within the USA and Canada. In addition, final assembly of static dischargers is now performed by Specmat Technologies Inc.